Off Road Camper Trailers.


Remote Area Support Vehicles.

100% Australian made.

Extreme Off Road Camper trailers.

Introducing Off Road Designs all new R.A.S.V. Remote Area Support Vehicle. A revolutionary new off road camper trailer design for those who are serious about outback adventure.

Proudly designed, developed and built right here in Australia, this camper trailer is bursting with features that you just won’t find on most other off road campers.

It all starts with our unique chassis design incorporating a 114 x 5mm central draw bar that runs the full length of the trailer chassis allowing the sub frame to flex and move as negotiates rough off road terrain.

The hot dipped galvanised chassis is made of laser cut c – section cross members and open ended rectangular hollow section steel allowing for easy wash down and cleaning, with no closed in areas where mud, sand and salt can get trapped and cause corrosion.

The trailer chassis also comes with the option of a rear mounted winch plate, recovery points and the ability to use the internally galvanised draw bar as an extra water tank or a compressed air tank.

Sitting above the main chassis you will find another secondary chassis sub frame that supports the all aluminium monocoque trailer body.

Unlike other trailers, the body is separated from the chassis with the use of 20 high-density polyurethane body mounts which operate in the same way as the body mounts on your tow vehicle. Helping to isolate the body from high speed off road vibrations caused by corrugations and uneven terrain.

Weighing in at just over 1300kg, the R.A.S.V. is lighter than most single axle off road camper trailers on the market today. The tandem axle design also gives you the added benefits of four wheel flotation and traction control. With twice the braking power and added stability off road.

Remote off-road exploration is what this ultimate off road camper was made for.

Being conscious of the restricted maneuvering area on off road tracks we have carefully thought out the body design, dimensions and over all ground clearance.

Allow you to venture out into areas that conventional off-road caravans and off road camper trailers simply wouldn’t able to fit.

The single draw bar configuration also gives you an advantage over traditional A frame trailer designs by allowing you to maneuver the trailer into an over 90* jack knife position behind the tow vehicle giving you a much tighter turning circle and reversing capability off road.

By keeping the trailer dimensions within width of most tow vehicles we have also been able to increase the maneuverability off road through tight areas, along narrow tree lined outback tracks, or along tight, twisting mountain roads.

Keeping the camper trailer dimensions in line with the tow vehicle also improves vehicle handling and fuel efficiency by reducing the amount of wind and drag that you are likely to encounter during higher speed on road travel.

Trailer Dimensions and Weight.

  • ATM: 1373kg.
  • GVM: 3500kg.
  • Ball Weight: 55kg.
  • Total Length: 4.78 M
  • Width: 1.92 M
  • Height: 2.2 M Excluding Roof Top Tent
  • Internal Storage Capacity: 6,500 LTRS

Our Standard Trailer  Inclusions:


Trailer Running Gear.

  • Two sets of Alco 2000 kg rocker roller leaf suspension.
  • 4 – 10 inch electric drum breaks.
  • 4 – Heavy duty large boar off road shock absorbers.
  • 2 – 2500 kg 65mm square steel axles.
  • 4 – Sets of 2500kg Japanese parallel bearings.
  • 2 – Rear pivot swinging mud flap mounts and mud flaps.
  • Trailer hand brake cables.
  • Frontal running gear stone protection. – Insertion rubber cross guard.
  • Hot dipped galvanised trailer chassis.

Main Chassis / Under body.

  • Full length 4.2 mtr, 114mm x 5mm tubular steel Draw bar.
  • 1.5 mtr frontal draw bar length. Allowing for a 90* jack knife turn.
  • The tubular draw bar can also be used as a 38 ltr water tank or double as a compressed air tank.
  • Rear draw bar heavy duty pintle hook and recovery point.
  • 6 – Heavy duty D – Shackle side recovery points.
  • C Section cross members for easy cleaning.
  • Solid chassis bracing gussets.
  • Flexible cross bracing struts.
  • 4 point heavy duty shock absorber top mounting pins.
  • 20 – 30mm x 20mm x 8mm Neoprene body mounts.
  • 4 – twin jerry can mounting brackets
  • Slotted steel electrical cable runners.
  • Twin under body water tank mounting points for water storage upgrades.

Main Chassis / Front Draw Bar.

  • 360 * Off Road Coupling.
  • Hand brake lever and mounting plate.
  • 2 – Heavy duty chain hooks.
  • 2 – High tensile safety chains.
  • High lift jack lifting point.
  • Swing Down trailer support jack.
  • Top and Bottom D – Shackle recovery points.
  • 20 mm hand brake lever bash plate.
  • Front draw bar jerry can mounting plate.
  • 32mm water fill point.
  • Front draw bar compressed air – water outlet valve.

Main Chassis Rear.

  • Rear step.
  • Rear winch cable slot.
  • 2 Water proof resin filled trailer lamps.
  • Heavy duty rear pintle hook recovery point.
  • 5 mm Tail light protection plates.
  • 20mm Pintle hook bottom bash plate.
  • Heavy Duty winch mounting plate.
  • Bolt on – pivoting mud flap assembly.
  • Rear draw bar compressed air – water outlet valve.

Secondary Chassis Sub Frame.

  • The unique Independently supported Secondary Sub Frame is mounted on 20 neoprene body mounts. Which remove and stop damaging vibration and stresses moving from the main chassis to the sub frame and up into the aluminium  body. While still allowing the main chassis to move and flex whilst negotiating rough terrain.

Wheels and Tyres.

  • 5 – 265 / 7 5 / 1 6. All terrain tyres.
  • 5 – 16 x 8 “ 6 stud black steel rims.

Trailer Body.

  • The all aluminium trailer bodies come fully powder coated inside and out with a 40mm x 40mm x 5mm welded aluminium sub frame.

  • Our fully monocoque constructed bodies are made from 2.5mm laser cut and CNC formed aluminium plate. Assembled with 6.4 mm structural rivets while incorporating strategically welded joints through out the design.
  • The monocoque body is made up of 9 large individual aluminium storage compartments which are all interconnected by internal ventilation openings to allow for even air pressurisation through out the entire body. The positive air pressurisation is achieved with the use of an external air pressurisation system with dual serviceable air filters. Keeping the entire trailer free from dust on even the toughest outback roads.


  • The body also comes complete with a total of 15 internally mounted storage shelves with rubber lined carpet inserts. These inserts are also included in the bases of both rear slide out draws and the large top storage shelf.
  • Two portable car fridge storage compartments with twin 65ltr lock in – lock out fridge slides, twin 12v accessory plugs and led voltage displays.
  • The huge rear storage area has a large pull out top draw with eight cargo tie down points, as well as a side and rear storage guard. To stop items from rolling forward or dropping down into the battery compartment below.

  • Below the top storage draw is another huge slide out storage area capable of carrying 175 kilograms of equipment.

  • The trailer is fitted with total of 7 external gas strut assisted doors with internal bracing for added strength and support to stop any flexing under load from the gas struts.
  • 6 Keyed alike lockable black whale tail door latch handles and locks.
  • 14 Heavy duty door hinges.

  • Rubber dust seals on all doors.
  • All doors, internal and external body panels come pre drilled with captured nuts installed to accommodate all of our bolt on upgrades and accessories.
  • The roof sections of the main cabinets and under side of the large internal shelf also have structural reinforcing supports for added strength.

  • Both external Wheel arches can easily be un bolted and replaced if damaged off road.
  • Behind the rear storage draws is an Internal battery storage area and tray which can hold up to 3 – 120 aH N86 Batteries.

  • 2 – 40 Ltr internal water tanks.
  • 12 volt water pump.

Kitchen and food preparation area.

The left side of the R.A.S.V. converts into a large L-shaped kitchen with a 1.4 mtr x 600mm folding kitchen work table that slides out from under the internal shelves. Perfect for outdoor cooking and food preparation. The optional 50 Ltr fridge-freezer sits to the left hand side of the kitchen on a 175 kg lock in – lock out draw slide. Perfect for easy food and cold storage access.

Above the kitchen work area you have 4 easily accessible storage shelves for kitchen utensils as well as a huge 1.3 mtr high x 700mm wide storage cabinet to the right with another 4 shelves. Perfect for packing away all of your dry goods and extra cooking equipment.

Add to this the two full sized 1.8m work tables that are stored in the trailers top shelf and you will have one of the most functional and versatile kitchens around any camp site.

Trailer electrical system.

BM20 Battery and Solar Management system.

  • Redarc BCDC 1225D Charger
  • Narva Fuse Box for Outlet Protection
  • NASA BM-1 Voltage Display Unit
  • Redarc 12v Solar Charging
  • Dual Anderson Outlets
  • Choice of Cigarette Lighter, Merit Engel or USB outlets
  • 4-Way LED Switch Panel with Fuse Protection ( i.e .Lighting / Accessories – water pumps )
  • 3 x Waterproof High Amp Buss Circuit Breaker

Trailer Electrical Fit out.

  • 7 pin plug for lighting and electric brake wiring.
  • Andersen plug to trailer batteries.
  • 1 – 120 Ah AGM deep cycle trailer battery.
  • 160 watt roof top mounted solar panel.

  • Andersen plugs for roof top solar panels and power to the roof top tent.
  • 9 Dual brightness press button led lights with glowing indicator switches, mounted internally to each door.

  • Large internal work light mounted inside the rear compartment.
  • Two rear mounted external led work lights.

  • One front mounted external led work light.
  • Twin rear aerial and work light mounting brackets.
  • Two car fridge recirculating cooling fans.
  • (*Battery management systems and switch panel upgrade options are available in the electrical options section.)

External Body Bolt On Accessories.

  • 4 Corner external jacking mounts and leveling points. $485
  • 2 – Foldaway trailer jack’s. $695
  • Rear external mounting bracket kit for  trailer jack’s $150

  • Maxtrax  mounting brackets and mounting pins.  (Rear Door) $120
  • Maxtrax  mounting brackets and mounting pins. (Driver side center door) $120
  • Maxtrax  mounting brackets and mounting pins. (Passenger side center door) $120

  • Side mounted Axe, Shovel, Mattock head and Mattock handle mount. $495 (Axe Pick and shovel not included)
  • Foldaway portable 250watt solar panels. $375

  • Maxtrax Recovery Boards. $299 pair.
  • Maxtrax Extreme Recovery Boards $499 pair.
  • Front mounted long handle shovel mount.$175
  • Spare 7 leaf suspension spring assembly. $310
  • Spare Suspension bolts and pins. $55
  • Wheel bearing and oil seal kit. $85
  • U bolts and U Bolt mounting plate. $55



Your Home Away From Home.


4 Person Roof Top Tent:



Enjoy the easiest and most comfortable camping experience imaginable with the Skycamp 4X rooftop tent.


The Skycamp’s floor folds out into a comfy “KING – SIZED” mattress.

A family of two adults and two children or up to 3 adults can sleep comfortably within the Sky Camp 4 . You won’t find another hard shell rooftop tent this spacious.


Skycamp’s signature Skyview roof top window gives you extra light by day and a view of the stars by night.

The rain fly can also be rolled up when not in use, allowing for extra ventilation.


The hard shell of the Skycamp is made of FRP (fibre-reinforced plastic) and has TWO layers for extra insulation and strength, setting it apart from other traditional roof top tent shells.

The hard shell that protects your Skycamp on the road is made of fiber-reinforced plastic and has a double layer with built-in air insulation, making it soundproof and condensation resistant. Most rooftop tents only have a single-layer shell.


The Skycamp’s floor is made of high-performance honeycomb aluminum panels that are lightweight and strong enough to hold a 1.8-ton Jeep Wrangler!

The flat, insulated aluminum panels will give you a much more comfortable night’s rest than sleeping in a tent on the cold rocky ground.


The tent “skin” is just one part of the Skycamp. It’s completely detachable, allowing you to switch it out with our lighter mesh tent in summer or replace the tent after a few years without having to buy a whole new Skycamp.


Details DO matter.

We care about the small things too.

– THREE layered window to adapt to all weather conditions.

– Custom-made stainless-steel hard shell locks.

– Hooks inside your Skycamp to hold ipad Movie Stands or your torch.

  • 1 Minute Setup: Get out of your car and be ready to camp in 60 seconds.
  • Expandable: The Skycamp’s king-size mattress sleeps 4 people.
  • Detachable: Switch to the Airflow Summer Tent (sold separately) in hot weather, and back to the canvas material for cooler times.
  • Breathable: Insulating Poly-Cotton Canvas tent fabric.
  • Hard Shell Locks: Closing straps have locks to give you peace of mind.
  • Quality: The Skycamp 4X is made with love at the iKamper factory in South Korea with quality components and custom molds.

IKAMP Specifications:

  • Closed 218 x 138 x 32cm
  • Open: 218 x 210 x 110cm
  • Mattress: 190 x 210 x 5cm
  • Ladder Length: Standard: 230cm
  • Long: 260cm
  • XL Add-On: 290cm
  • Gross Weight: 70kg
  • Tent Weight Limit: 408kg
  • Ladder Weight Limit: 150kg

Standard Trailer Camping Inclusions.

Each trailer comes equipped with:

  • Darche Eclipse 2.2mtr 270* wrap around awning.

  • Joolka Hot Water Service.

  • Darche Portable Shower tent.

  • Two full length camp tables. 183 cm x 76 cm.

  • Two Darche Camp Chairs.

  • Two portable Primus gas stoves.

  • Aluminium Double Sided 4 Step – Step Ladder. To help you get to those hard to reach places when setting up awnings etc.

  • Fire Extinguisher.

  • Two Washing up bowls.

  • 8.5 Kg Gas Bottle.


Upgrade your Trailer with the following optional extras:



  • Draw bar compressed air tank option. $225
  • Rear winch mounting plate. $350
  • Single jerry can mount on draw bar. $175
  • Tyre upgrade of 5 Tyres to 285 / 75 / 16 Mud Terrain. $530

ARB fitted – Rear Winch.

Bush Ranger Revo Winch. $1,445.

Includes 120 Ah AGM battery, wiring and installation. (Not compatible with Lithium battery install.)

The Bushranger Revo won’t let you be defeated by rugged terrain. Built to tough and uncompromising standards, the Revo’s superior pulling power means it’ll deliver faultless vehicle recovery in any terrain.

Includes 120 Ah AGM battery, wiring and installation.

Maximum Load – (single line) 4535Kgs (10000lbs)

Motor – 5.2 hp 12v Series wound.

Control – Remote switch with 5mtr lead.

Cable – 28m x 10 mm Diameter.

Weight – 37kg.


ARB RK11 Essentials Recovery Kit

With an ARB essential recovery kit you have the peace of mind of carrying a purpose-built recovery bag filled with a selection of items that will come in handy the next time you get stuck. $325.

This kit contains:

  • 8,000kg snatch strap
  • 4,500kg winch extension strap
  • 12,000kg tree trunk protector
  • 9,000kg snatch block
  • bow shackles
  • winch pack storage bag

ARB Fridge Freezer

  • 47 Ltr Fridge Freezer. $1,249.

ARB Twin Compressor.

Providing optimum power, the ARB twin motor design delivers class-leading air flow for fast inflation purposes. Constructed of lightweight, high-strength engineering grade materials, it incorporates quality components for quiet operation and extended durability.

The twin motors incorporate internal thermal protection against extreme temperature damage while a heavy duty in-line maxi fuse for each motor provides professional circuit protection. $640.  Includes wiring and Installation.


Internal Body options.

  • Passenger side fishing rod mounts. $85
  • Recovery strap storage mounts. x 3. $150

Body Configuration / Generator Bay.

  • There is also the option of fitting an internal generator bay inside the driver side front compartment with sound proofing so that your generator can be used in low noise level camping areas.
  • The generator is mounted to an internal draw slide so it can be easily accessed.
  • The front panel of the generator compartment is fitted with a spring operated door vent. This allows air flow to a fan shroud and thermo fan which draws high volume external air into the cabinet to cool the generator and expel exhaust fumes.
  • The generator bay side door is fitted with an internal ventilation panel and a gas strut operated external door. Which allows you to open the door and run the generator while it is locked up safely in the trailer.
  • Sound proofing, 240v safety switch, internal and external 240v sockets are also included in this option.
  • We can also run 240v wiring across to the kitchen if you want to run toasters or jugs.

Water Tank options.

  • Reserve 40 ltr slim line water tanks Installed below fridge slides in front compartment gravity fed. $400
  • Twin 40 Ltr Aluminium water tanks installed into the Chassis frame. POA..

Battery Management and electrical System Options.

Upgrade from the BM20 to the BM40 Battery Management system. $195.


  • Redarc BCDC 1240D Charger
  • Narva Fuse Box for Outlet Protection
  • NASA BM-1 Voltage Display Unit
  • Redarc 12v Solar Charging
  • Dual Anderson Outlets
  • Choice of Cigarette Lighter, Merit Engel or USB outlets (one of each is standard)
  • 4-Way LED Switch Panel with Fuse Protection ( i.e. Lighting / Accessories – water pumps )
  • 3 x Waterproof High Amp Buss Circuit Breakers


Off Road Designs Total Battery Management System.

Enerdrive BM 1000 up gradable, complete battery and solar Management system.



Enerdrive ePOWER B-TEC Lithium Battery Upgrades.

  • Enerdrive ePower B-TEC 12v 100Ah Lithium-Ion with App Based Monitoring $1,760
  • Enerdrive ePower B-TEC 12v 125Ah Lithium-Ion with App Based Monitoring $2,350.
  • Enerdrive ePower B-TEC 12v 200Ah Lithium-Ion with App Based Monitoring  $3500.

Smart Phone Monitoring System.

The Enerdrive ePOWER B-TEC battery incorporates new wireless Battery Monitoring Technology.

By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following battery information;

  • Battery Capacity
  • Battery Voltage
  • Battery Current (Amps)
  • Battery State of Charge (SOC)
  • Battery State of Health (SOH)
  • Battery Status
  • Individual Cell Voltage
  • Battery Temperature
  • Battery Cycles
  • Battery Alarms
  • Battery Event Information